首页Advanced Materials ResearchApplied Physics and Material ScienceThe Photon Attenuation Coefficients of Building...

摘要:

The theoretical values of mass attenuation coefficients have been calculated using winXcom computer program 11. Also, Figure 1 shows that, mass attenuation coefficients increase linearly with the weight fraction of PbO and decrease by increasing gamma-ray energy. In all experimental results, the estimated experimental uncertainties are about. ADS Classic is now deprecated. It will be completely retired in October 2019. Please redirect your searches to the new ADS modern form or the classic form.More info can be found on our blog. In 2011, El-Khayatt reported a new program, which called NXcom program, to calculate both fast neutrons effective removal cross-sections and c-rays (or X-ray) attenuation coefficients for any.

The total mass attenuation coefficient (μ/ρ, cm2 g-1) of gamma-ray for building materials containing with Lead Carbonate (PbCO3) have been studied. The raw building material have cement, sand and stone in the ratio 1 : 2 : 4. The raw material was mixed with 30% of PbCO3 to be used as the sample material. The mass attenuation coefficient of the raw material has been calculated by theoretical approach using WinXCom program for the photon energy band from 1 keV to 100 GeV. The composition of sample material was analyzed by energy dispersive X-ray fluorescence spectrometer (EDXRF). The variations of mass attenuation coefficient are shown graphically and compared with that of standard shielding concretes. It was found that the sample building material has higher value of mass attenuation coefficient than standard shielding concretes at energy zone above 2–7 keV, 90–800 keV and 5 MeV–100 GeV.

Witthaya Mekhum, Narong Sangwaranatee, Pichet Limsuwan, HongJoo Kim, Mitra Djamal and Jakrapong Kaewkhao

N. Chanthima et al., 'The Photon Attenuation Coefficients of Building Materials Containing with Lead Carbonate (PbCO3)', Advanced Materials Research, Vol. 979, pp. 395-400, 2014

Natthakridta Chanthima *, Kazuhito Shimada, Jakrapong Kaewkhao
Building Material, Mass Attenuation Coefficient, Radiation Properties

[1] M.E. Medhat, Gamma-ray attenuation coefficients of some building materials available in Egypt, Ann. Nucl. Energy. 36 (2009) 849–852.

DOI: https://doi.org/10.1016/j.anucene.2009.02.006

[2] I. Akkurt, S. Kilincarslan, C. Basyigit, The photon attenuation coefficients of barite, marble and limra. Ann. Nucl. Energy. 31 (2004) 577–582.

DOI: https://doi.org/10.1016/j.anucene.2003.07.002

Winxcom Program For Calculating X-ray Attenuation Coefficients In Science

[3] M.I. Awadallah, M.M. Imran, Experimental investigation of c-ray attenuation in Jordanian building materials using HPGe-spectrometer. J. Environ. Radioactivity. 94 (2007) 129–136.

DOI: https://doi.org/10.1016/j.jenvrad.2006.12.015

[4] I.C.P. Salinas, C.C. Conti, R.T. Lopes, Effective density and mass attenuation coefficient for building material in Brazil. Appl. Radiat. Isot. 64 (2006) 13–18.

DOI: https://doi.org/10.1016/j.apradiso.2005.07.003

[5] C. Singh, T. Singh, A. Kumar, G.S. Mudahar, Energy and chemical composition dependence of mass attenuation coefficients of building materials. Ann. Nucl. Energy. 31 (2004) 1199–1205.

DOI: https://doi.org/10.1016/j.anucene.2004.02.002

[6] I. Türkmen, Y. Özdemir, M. Kurudirek, F. Demir, Ö. Simsek, R. Demirboğa, Calculation of radiation attenuation coefficients in Portland cements mixed with silica fume, blast furnace slag and natural zeolite. Ann. Nucl. Energy. 35 (2008).

DOI: https://doi.org/10.1016/j.anucene.2008.03.012

[7] J.H. Hubbell, S.M. Seltzer, 1995. Tables of X-ray mass attenuation coefficients and mass energy absorption coefficients 1 keV to 20MeV for elements Z = 1–92 and 48 additional substances of dosimetric interest, NISTIR 5632.

DOI: https://doi.org/10.6028/nist.ir.5632

Coefficients

[8] Berger, M.J., Hubbell, J.H., 1987/1999. XCOM: photon cross sections database, Web Version 1. 2, available at http: / physics. nist. gov/xcom. National Institute of Standards and Technology, Gaithersburg, MD 20899, USA. (Originally published as NBSIR 87-3597 'XCOM: Photon Cross Sections on a Personal Computer', ).

DOI: https://doi.org/10.6028/nbs.ir.87-3597

[9] L. Gerward, N. Guilbert, K.B. Jensen, H. Levring, X-ray absorption in matter. Reengineering XCOM. Radiat. Phys. Chem. 60 (2001) 23–24.

DOI: https://doi.org/10.1016/s0969-806x(00)00324-8

[10] L. Gerward, N. Guilbert, K.B. Jensen, H. Levring, WinXCom–a program for calculating X-ray attenuation coefficients. Radiat. Phys. Chem. 71 (2004) 653–654.

DOI: https://doi.org/10.1016/j.radphyschem.2004.04.040

[11] I.I. Bashter, Calculation of radiation attenuation coefficients for shielding concretes. Ann. Nucl. Energy. 24 (1997) 1389–1401.

DOI: https://doi.org/10.1016/s0306-4549(97)00003-0

[12] D.F. Jackson, D.J. Hawkes, X-ray attenuation coefficients of elements and mixtures, Phys. Rep. 70 (1981) 169–233.

摘要: Numeric simulation of light passing through the scattering medium by the Monte-Carlo method was carried out. The influence of multiple scattering on the light beam attenuation in an absorbing media was investigated. The additional absorption appearance was shown to be initiated by multiple scattering. The experimental evidence for this absorption is abrupt increasing of beam attenuation at high particle concentrations. The behaviour of the additional absorption was investigated. The results of numeric calculation are in good agreement with experimental results.
109
Program
摘要: Lead glass that shows a high refractive index is the best known and most popular for radiation shielding glass. Due to the toxic of lead compounds on the human organisms as well as the environmental issues, lead free glass was fabricated by using some heavy elements such as barium and bismuth to replace lead. In this study, colorless lead free glass samples were prepared from 40 wt% local quartz sand and various concentration of BaCO3 (20-40 wt%) as the main compositions in order to study radiation shielding property. The glass mixtures were melted conventionally using electric furnace at the maximum temperature of 1250°C with 4 hr dwelling time. The gamma attenuation characteristics were studied for the photon energy of 662 keV from Cs-137. Density and refractive index were also determined. It was found that a variation of prepared glass samples can be produced both in terms of clarity and radiation shielding properties. The attenuation coefficients were linearly increased as the increase of BaCO3 content. The density and refractive index were also increased. The linear and mass attenuation coefficients of the glass sample containing 40 wt% BaCO3 were 0.234 cm-1 and 0.0726 cm2g-1. In conclusion, a low density glass samples will give rise less attenuation than a high density ones. It can be concluded that the lead-free high refractive index glass that is one of the environmental materials can be used as the gamma radiation shielding glass.
207
摘要: The mass attenuation coefficients of blue sapphire were measured at the different energy of γ-rays using the Compton scattering technique. There are in good agreement of scattered gamma rays energies between theoretical value and experimental value, reflecting the validation of Compton scattering system setup. The results show that, the experimental values of mass attenuation coefficient are in good agreement with the theoretical values. The mass attenuation coefficients increase with the decrease in gamma rays energies. This may be attributed to the higher photon interaction probability of blue sapphire at lower energy. This result is a first report of mass attenuation coefficient of blue sapphire at different gamma rays energies.
71
摘要: Cement-based material samples having 0%, 5%, 10% and 20% B4C concentrations have been prepared for this reserach. Neutron attenuation measurement has been done by using 14.8MeV neutrons from the 5SDH-2 accelerator, and some mechanics properties of the same proportion also have been tested. It has been shown that when the B4C precentage and thickness of the samples increase, neutron attenuation values of the samples increase. Both the flexural and compressive strength firstly increased with B4C addition up to 10% approximately, and then decreased sharply with an addition up to 20%. It is thus possible to enhance the neutron shielding property of cement-based materials by adding B4C.
402